Name   Pi-Guey Su
Phone Number   25332(office)
Education   Tsing-Hua University
Research Field   Analytical Chemistry
  Nano-Materials
  Chemical Sensors
Email   spg@faculty.pccu.edu.tw

Selected Publications

國外期刊論文

  1. P. G. Su*, W. C. Li, J. Y. Tseng, C. J. Ho, Fully transparent and flexible humidity sensors fabricated by layer-by-layer self-assembly of thin film of poly(2-acrylamido-2-methylpropane sulfonate) and its salt complex, Sensors and Actuators B 145 (2010) Accepted. (IF:3.083)

  2. P. G. Su*, T. T. Pan, Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic decomposition method, Materials Chemistry and Physics 125 (2011) 351-357. (IF:2.015)

  3. P. G. Su*, Y. S. Chuang, Flexible H2 sensors fabricated by layer-by-layer self-assembly thin film of multi-walled carbon nanotubes and modified in situ with Pd nanoparticles, Sensors and Actuators B 145 (2010) 521–526. (IF:3.083)

  4. P. G. Su*, W. C. Shie, The effect of the type of polycation used in mica nanocomposite thin films prepared by layer-by-layer technique on low-humidity sensing, Sensor Letters 8 (2010) 848-856. (IF: 0.626)

  5. P. G. Su*, C. T. Lee, C. Y. Chou, Flexible NH3 sensors fabricated by in situ self-assembly of polypyrrole, Talanta 80 (2009) 763-769. (IF:3.290)

  6. P. G. Su*, K. H. Cheng, Self-assembly of polyelectrolytic multilayer thin ?lms of polyelectrolytes on quartz crystal microbalance for detecting low humidity, Sensors and Actuators B 142 (2009) 123–129. (IF: 3.083).

  7. P. G. Su*, C. T. Lee, C. Y. Chou, K. H. Cheng, Y. S. Chuang, Fabrication of ?exible NO2 sensors by layer-by-layer self-assembly of multi-walled carbon nanotubes and their gas sensing properties, Sensors and Actuators B 139 (2009) 488–493. (IF: 3.083).

  8. P. G. Su*, J. Y. Tseng, Y. C. Huang, H. H. Pan, P. C. Li, Novel fully transparent and ?exible humidity sensor, Sensors and Actuators B 137 (2009) 496–500. (IF: 3.083).

  9. P. G. Su*, K. H. Cheng, Layer-by-layer assembly of mica and polyelectrolyte for use in low-humidity sensor, Sensors and Actuators B 137 (2009) 555–560. (IF: 3.083).

  10. P. G. Su*, J. F. Tsai, Low-humidity sensing properties of carbon nanotubes measured by a quartz crystal microbalance, Sensors and Actuators B 135 (2009) 506-511. (IF: 3.083).

  11. P. G. Su*, C. Y. Chen, Humidity sensing and electrical properties of Na- and K-montmorillonite, Sensors and Actuators B 129 (2008) 380-385. (IF: 3.083).

  12. P. G. Su*, C. P. Wang, Flexible humidity sensor based on TiO2 nanoparticles-polypyrrole-poly- [3-(methacrylamino)propyl] trimethyl ammonium chloride composite materials, Sensors and Actuators B 129 (2008) 538-543. (IF: 3.083).

  13. P. G. Su*, Y. P. Chang, Low-humidity sensor based on a quartz-crystal microbalance coated with polypyrrole/Ag/TiO2 nanoparticles composite thin films, Sensors and Actuators B 129 (2008) 915-920. (IF: 3.083).

  14. P. G. Su*, C. S. Wang, “In situ synthesized composite thin films of MWCNTs/PMMA doped with KOH as a resistive humidity sensor”, Sensors and Actuators B 124 (2007) 303-308. (IF: 3.083).

  15. P. G. Su*, C. S. Wang, “Novel flexible resistive-type humidity sensor” Sensors and Actuators B 123 (2007) 1071-1076. (IF: 3.083).

  16. P. G. Su*, L.N. Huang, “Humidity sensors based on TiO2 nanoparticles/polypyrrole composite thin films” Sensors and Actuators B 123 (2007) 501-507. (IF: 3.083).

  17. Y. L. Sun, R. J. Wu, Y. C. Huang, P. G. Su, Murthy Chavali, Y. Z. Chen, C. C. Lin*,In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation”, Talanta 73 (2007) 857-861. (IF: 3.290).

  18. Y. L. Sun, Y. Z. Chen, R. J. Wu, Murthy Chavali, Y. C. Huang,  P. G. Su,  C. C. Lin*, “Poly(l-lactide) stabilized gold nanoparticles based QCM sensor for low humidity detection” Sensors and Actuators B 126 (2007) 441-446. (IF: 3.083).

  19. P. G. Su*, Y. L. Sun, C. S. Wang, C. C. Lin,” Humidity sensing and electrical properties of hybrid films prepared from [3-(methacrylamino)propyl] trimethyl ammonium chloride, aqueous monodispersed colloidal silica and methyl methacrylate” Sensors and Actuators B 116 (2006) 483-489. (IF: 3.083).

  20. P. G. Su*, Y. L. Sun, C. C. Lin,” Novel low humidity sensor made of TiO2 nanowires/poly(2-acrylamido-2-methylpropane sulfonate composite material film combined with quartz crystal microbalance” Talanta 69 (2006) 946-951. (IF: 3.290).

  21. P. G. Su*, Y. L. Sun, C. C. Lin, “A low humidity sensor made of quartz crystal microbalance coated with multi-walled carbon nanotubes/Nafion composite material films” Sensors and Actuators B 115 (2006) 338-343. (IF: 3.083).

  22. P. G. Su*, C. J. Ho, Y. L. Sun, I. C. Chen, “A micromachined resistive-type humidity sensor with a composite material as sensitive film” Sensors and Actuators B 113 (2006) 837-842. (IF: 3.083).

  23. P. G. Su*, Y. L. Sun, C. C. Lin, “Humidity sensor based on PMMA simultaneously doped with two different salts” Sensors and Actuators B 113 (2006) 883-886. (IF: 3.083).

  24. P. G. Su*and S. C. Huang, “Electrical and humidity sensing properties of carbon nanotubes-SiO2-poly(2-acrylamido-2-methylpropane sulfonate) composite material” Sensors and Actuators B 113 (2006) 142-149. (IF: 3.083).

  25. P. G. Su* and Chyi-Long Uen, “A resistive-type humidity sensor using composite films prepared from poly(2-acrylamido-2-methylpropane sulfonate) and dispersed organic silicon sol” Talanta 66 (2005) 1247-1253 (IF: 3.290).

  26. P. G. Su* and Chyi-Long Uen, “In situ copolymerization of copolymer of methyl methacrylate and [3-(methacrylamino)propyl] trimethyl ammonium chloride on an alumina substrate for humidity sensing” Sensors and Actuators B 107 (2005) 317-322 (IF: 3.083).

  27. H. W. Chen*, R. J. Wu, K. H. Chan, Y. L. Sun and P. G. Su "The Application of CNT/Nafion Composite Material Humidity Sensing Measurement " Sensors and Actuators B 104 (2005) 80-84(IF: 3.083).

  28. P. G. Su* and S. C. Huang, “Humidity sensing and electrical properties of a composite material of SiO2 and poly-[3-(methacrylamino)propyl] trimethyl ammonium chloride” Sensors and Actuators B 105 (2005) 170-175 (IF: 3.083).

  29. P. G. Su* and R. J. Wu “Uncertainty of humidity sensors testing by means of divided-flow generator” Measurement 36 (2004) 21-27 (IF:0.500).

  30. P. G. Su* and W. Y. Tsai, “Humidity sensing and electrical properties of a composite material of nano-sized SiO2 and poly(2-acrylamido-2-methylpropane sulfonate)” Sensors and Actuators B 100 (2004) 417 (IF: 3.083)

  31.  P. G. Su* and I. C. Chen, Laminating two-layer thick films structure tin oxide-based butane gas sensor operating at low temperature” Sensors and Actuators B 99 (2004) 304. (IF: 3.083)

  32. Bee-Yu Wei*, Ming-Chih Hsu, Pi-Guey Su, Hong-Ming Lin, Ren-Jang Wu, Hong-Jen Lai “A novel SnO2 gas sensor doped with carbon nanotubes operating at room temperature” Sensors and Actuators B 101 (2004) 81-89. (IF: 3.083)

  33. P. G. Su*, R. J. Wu and, F. P. Nieh “Detection of nitrogen dioxide using mixed tungsten oxide-based thick film semiconductor sensor” Talanta 59 (2003) 667-672. (IF: 3.290)

  34. R. J. Wu*, C. H. Hu, C. T. Y. and P. G. Su, “Nanogold powdered cobalt oxide for carbon monoxide sensor” Sensors and Actuators B 96 (2003) 596. (IF: 3.083)

  35. P. G. Su*, I. C. Chen and R. J. Wu, “Use of poly(2-acrylmido-2-methylpropane sulfonate) modified with tetraethyl orthosilicate as sensing material for measurement of humidity” Anal. Chim. Acta 449 (2001) 103. (IF: 3.757)

  36. S. D. Huang*, P. G. Su, S. P. Huang, Y. L. Ho and T. Y. Tsai, “Adsorbing colloid flotation with polyaluminum chloride: a powerful technique for removing heavy metals from wastewater” Separation Science and Technology 35 (2000) 1223.

  37. P. G. Su and S. D. Huang*, “Determination of organophosphorus pesticides in water by solid-phase microextraction” Talanta 49 (1999) 393. (IF: 3.290)

  38.  P. G. Su and S. D. Huang*, “Use of 4-(2-pyridylazo)resocinol or 2-(2-pyridylazo)-5-dimethylaminophenol as chelating agent for determination of cadmium in seawater by atomic absorption spectrometry with on-line flow-injection sorbent extraction” Anal. Chim. Acta, 376 (1998) 305. (IF: 3.757)

  39. P. G. Su and S. D. Huang*, “Direct and simultaneous determination of copper and manganese in seawater with a multielement graphite furnace atomic absorption spectrometer” Spectrochim. Acta, 53B (1998) 699. (IF: 2.719)

  40.  P. G. Su and S. D. Huang*, “Direct and simultaneous determination of molybdenum and vanadium in seawater by a multielement graphite furnace atomic absorption spectrometer” J. Anal. At. Spectrom., 13 (1998) 641. (IF: 3.435)

Patent

  1. 蘇平貴 ”滲透裝置之成型裝置及其成型方法” 中華民國專利 證號162204 (2002)。

  2. 蘇平貴、陳一誠、吳仁彰 ”濕度感測材料以及製備該濕度感測材料的方法” 中華民國專利 證號169161 (2003)。

  3. 吳仁彰、蘇平貴、胡正鴻、葉君棣 “半導體式氣體感測元件及氣體感測裝置” 中華民國專利 證號 194270 (2004)。

  4. 吳仁彰、蘇平貴、胡正鴻、葉君棣 “固態電解質式氣體感測元件及氣體感測裝置” 中華民國專利 證號 192089 (2004)。

  5. 魏碧玉、賴宏仁、蘇平貴、吳仁彰、林鴻明、孫益陸 ”氣體感測器及其製造方法” 中華民國專利 證號 202724 (2004)。

  6. 孫益陸、吳仁彰、陳宏豪、蘇平貴 ”石英晶體微天平裝置” 中華民國專利 證號 I 220687 (2004)。

  7. 陳慧雯、吳仁彰、孫益陸、蘇平貴 ”濕度感測元件、裝置及其製造方法” 中華民國專利 證號 I 242639 (2005)。

  8. 陳慧雯、吳仁彰、孫益陸、蘇平貴 “Humidity sensor element, device and method for manufacturing thereof” 英國專利 證號GB2407384 (2006)。

  9. 闕妙如、蘇平貴、黃奕笑、陳一誠、石東生”含有氧化鋅或銦鋅混合氧化物奈米線的氣體感測器及偵測NOx氣體的方法” 中華民國專利 證號 I 281539 (2007)。

  10. 陳慧雯、吳仁彰、孫益陸、蘇平貴 “Humidity sensor element, device and method for manufacturing thereof” 美國專利 證號7270002 (2008)。

  11. 闕妙如、蘇平貴、黃奕笑、陳一誠、石東生” Gas sensor with nanowires of zinc oxide or indium/zinc mixed oxides and method of detecting NOx gas” 美國專利 證號7631540 (2010)。